[64] Tunnel-Type; [65] Tunnel-Medium-Type; [66] Tunnel-Client-Endpoint - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

Related Topics
radius include tunnel-type
radius include tunnel-medium-type
radius include tunnel-client-endpoint
Copyright © 2010, Juniper Networks, Inc.
Example
host1(config)#radius include nas-port-type acct-start enable
Use the no version to restore the default, enable.
Monitoring the DSL-Port-Type RADIUS Attribute on page 300

[64] Tunnel-Type

Use the following command to manage the Tunnel-Type RADIUS attribute.
radius include tunnel-type
Use to include the Tunnel-Type attribute in Access-Request, Acct-Start, and Acct-Stop
messages.
You can control inclusion of the Tunnel-Type attribute by enabling or disabling this
command.
See radius include
Example
host1(config)#radius include tunnel-type access-request enable
Use the no version to restore the default, enable.

[65] Tunnel-Medium-Type

Use the following command to manage the Tunnel-Type-Medium RADIUS attribute.
radius include tunnel-medium-type
Use to include the Tunnel-Medium-Type attribute in Access-Request, Acct-Start, and
Acct-Stop messages.
You can control inclusion of the Tunnel-Medium-Type attribute by enabling or disabling
this command.
See radius include
Example
host1(config)#radius include tunnel-medium-type acct-start enable
Use the no version to restore the default, enable.

[66] Tunnel-Client-Endpoint

Use the following command to manage the Tunnel-Client-Endpoint RADIUS attribute.
radius include tunnel-client-endpoint
Chapter 3: Configuring RADIUS Attributes
203