ip dvmrp prune-timeout
Configures the prune packet retransmission value. This value is the duration of time that the routing switch
will wait if it continues to receive unwanted multicast traffic before retransmitting a prune message.
ip dvmrp prune-timeout seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
N/A
Examples
-> ip dvmrp prune-timeout 30
Release History
Release 6.1; command was introduced.
Related Commands
ip dvmrp prune-lifetime
show ip dvmrp prune
show ip dvmrp
MIB Objects
alaDvmrpGlobalConfig
alaDvmrpPruneRetransmission
page 29-12
Specifies retransmission time, in seconds (30–86400).
default
30
Indicates the length of time a prune will be in effect.
Displays DVMRP prune entries, including the router's upstream
prune state.
Displays the global DVMRP parameters.
OmniSwitch CLI Reference Guide
DVMRP Commands
June 2012