Cisco ONS 15454 Series Procedure Manual page 818

Manage the CTC Window
Table A-2
Node Name
Terminal (west)
Terminal (east)
Line
OSC regeneration line
Unknown
Manage the CTC Window
Different navigational methods are available within the CTC window to access views and perform
management actions. You can double-click and right-click objects in the graphic area and move the
mouse over nodes, cards, and ports to view popup status information.
CTC Menu and Toolbar Options
The CTC window menu bar and toolbar provide primary CTC functions.
that are available from the CTC menu and toolbar.
Cisco ONS 15454 Procedure Guide, R5.0
A-4
Description of Node Icons on Network View Map (continued)
Icon Description
These nodes are represented as a three-dimensional cylinder
with one amplifier on the west side of the icon.
•
•
These nodes are represented as a three-dimensional cylinder
with one amplifier on the east side of the icon.
•
•
These nodes are represented as a three-dimensional cylinder
with one arrow pointing west and another arrow pointing east.
•
•
An unknown DWDM node icon is represented as a
three-dimensional cylinder with one arrow pointing north. An
unknown node means that the provisioned cards do not allow
the node to fit any of the defined DWDM node categories.
Appendix A
A terminal node contains one 32-channel demultiplexer
and one 32-channel multiplexer. No OADM cards are
provisioned.
A flexible terminal node contains a series of OADM and
amplifier cards.
A terminal node contains one 32-channel demultiplexer
and one 32-channel multiplexer. No OADM cards are
provisioned.
A flexible terminal node contains a series of OADM and
amplifier cards.
A line node only has OPT-PRE or OPT-BST amplifiers
provisioned.
An optical service channel (OSC) regeneration line node
contains two OSC-CSM cards.
CTC Information and Shortcuts
Table A-3 shows the actions
December 2004