Table 18-7 Line Options For Ds3-12 Or Ds3N-12 Cards - Cisco ONS 15454 Series Procedure Manual

Chapter 18 DLPs A100 to A199
Table 18-7
Parameter
Port #
Port Name
SF BER
SD BER
Line Length Defines the distance (in feet) from
Admin State Sets the port service state unless network
March 2007
DLP-A166 Change Line and Threshold Settings for the DS3-12 or DS3N-12 Cards
Line Options for DS3-12 or DS3N-12 Cards
Description
Sets the port number.
Sets the port name.
Sets the signal fail bit error rate.
Sets the signal degrade bit error rate.
backplane connection to the next
termination point.
conditions prevent the change.
Options
1 to 12
User-defined, up to 32 alphanumeric/special
characters. Blank by default.
See the "DLP-A314 Assign a Name to a
Port" task on page 20-8.
1E-3
•
1E-4
•
1E-5
•
1E-5
•
1E-6
•
1E-7
•
1E-8
•
1E-9
•
0 - 225 (default)
•
226 - 450
•
IS—Puts the port in-service. The port
•
service state changes to IS-NR.
IS,AINS—Puts the port in automatic
•
in-service. The port service state
changes to OOS-AU,AINS.
OOS,DSBLD—Removes the port from
•
service and disables it. The port service
state changes to OOS-MA,DSBLD.
OOS,MT—Removes the port from
•
service for maintenance. The port
service state changes to OOS-MA,MT.
Cisco ONS 15454 Procedure Guide, R5.0
18-33