Chapter 11 Change Card Setting - Cisco ONS 15454 Series Procedure Manual

NTP-A88 Modify Line Settings and PM Parameter Thresholds for Electrical Cards
NTP-A88 Modify Line Settings and PM Parameter Thresholds for
Electrical Cards
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
electrical card settings. If you are already logged in, proceed to
Complete the
Step 2
database.
Perform any of the following tasks as needed:
Step 3
•
•
•
•
•
•
•
•
When you are finished changing the card settings, complete the
Step 4
procedure on page
Stop. You have completed this procedure.
NTP-A89 Modify Line Settings and PM Parameter Thresholds for
OC-N Cards
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Cisco ONS 15454 Procedure Guide, R5.0
11-2
This procedure changes the line and threshold settings for electrical cards.
None
NTP-A17 Install the Electrical Cards, page 2-8
As needed
Onsite or remote
Provisioning or higher
"DLP-A60 Log into CTC" task on page 17-66
"NTP-A108 Back Up the Database" procedure on page 15-4
DLP-A165 Change Line and Threshold Settings for the DS1-14 or DS1N-14 Cards, page 18-28
DLP-A166 Change Line and Threshold Settings for the DS3-12 or DS3N-12 Cards, page 18-32
DLP-A167 Change Line and Threshold Settings for the DS3-12E or DS3N-12E Cards, page 18-36
DLP-A168 Change Line and Threshold Settings for the DS3XM-6 Card, page 18-41
DLP-A387 Change Line and Threshold Settings for the DS3XM-12 Card, page 20-74
DLP-A526 Change Line and Threshold Settings for the DS3i-N-12 Cards, page 22-21
DLP-A388 Change Line and Threshold Settings for the DS3/EC1-48 Cards, page 20-80
DLP-A169 Change Line and Threshold Settings for the EC1-12 Card, page 18-45
15-4.
This procedure changes the line and threshold settings for optical cards.
None
NTP-A16 Install the OC-N Cards, page 2-6
As needed
Onsite or remote
Provisioning or higher
Chapter 11 Change Card Settings
at the node where you want to change the
Step 2.
to preserve the existing
"NTP-A108 Back Up the Database"
December 2004