Cisco ONS 15454 Series Procedure Manual page 672

DLP-A338 Run the CTC Installation Wizard for UNIX
Hard drive—20 GB hard drive recommended with at least 50 MB of space available
•
Operating system—Solaris 8 or 9
•
Note
Change the directory; type:
Step 2
cd /cdrom/cdrom0/
Step 3 From the techdoc454 CD directory; type:
./setup.bat
The Cisco Transport Controller Installation Wizard displays the components that will be installed on
your computer:
• Java Runtime Environment 1.4.2
Acrobat Reader 6.0.1
•
Online User Manuals
•
CTC JAR files
•
Click Next.
Step 4
Complete one of the following:
Step 5
Click Typical to install all four components. If you already have JRE 1.4.2 installed on your
•
computer, choose Custom.
Click Custom if you want to install only some of the components. By default, the JRE and Acrobat
•
Reader are selected.
Click Next.
Step 6
Step 7 Complete the following, as applicable:
• If you selected Typical in
• If you selected Custom, check the CTC component that you want to install and click Next.
The directory where the installation wizard will install CTC online user manuals appears. The default is
Step 8
/usr/doc/ctc.
If you want to change the CTC online user manuals directory, type the new directory path in the
•
Directory Name field, or click Browse to navigate to the directory.
If you do not want to change the CTC online user manuals directory, skip this step.
•
Click Next.
Step 9
Review the components that will be installed. If you want to change the components, complete one of
Step 10
the following:
If you selected Typical in
•
Choose Custom and repeat Steps
If you selected Custom in
•
you reach the component selection page and check the desired components. Repeat Steps
through 9.
Cisco ONS 15454 Procedure Guide, R5.0
20-28
These requirements are guidelines. CTC performance is faster if your computer has a faster
processor and more RAM.
Step
If you selected Online User Manuals, continue with
–
If you did not select Online User Manuals, continue with
–
Step
Step
5, continue with Step 8.
Step
5, click Back twice to return to the installation setup type page.
6 through 9.
5, click Back once or twice (depending on the components selected)
Chapter 20 DLPs A300 to A399
8.
Step 10.
7
March 2005