Dlp- A391 View Ce-Series Ether Ports And Pos Ports Statistics Pm Parameters - Cisco ONS 15454 Series Procedure Manual

Chapter 20 DLPs A300 to A399
DLP-A391 View CE-Series Ether Ports and POS Ports Statistics PM Parameters
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the CE-Series Ethernet card where you want to view PM counts. The card
Step 1
view appears.
Click the Performance > Ether Ports > Statistics
Step 2
Statistics tabs.
Figure 20-18
Ether ports
Click Refresh. Performance monitoring statistics for each port on the card appear.
Step 3
View the PM parameter names that appear in the Param column. The PM parameter values appear in the
Step 4
Port # columns. For PM parameter definitions, refer to the "Performance Monitoring" chapter in the
Cisco ONS 15454 Troubleshooting Guide.
March 2005
This task enables you to view CE-Series Ether Ports and POS Ports
statistics PM counts at selected time intervals to detect possible
performance problems.
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Retrieve or higher
Ether Ports Statistics on the CE-Series Card View Performance Window
Statistics Performance
tab tab tab
Refresh
button
DLP-A391 View CE-Series Ether Ports and POS Ports Statistics PM Parameters
(Figure 20-18) or Performance > POS Ports >
Card
view
Auto-refresh Baseline
drop-down list button
Cisco ONS 15454 Procedure Guide, R5.0
Clear Help
button button
20-87