Figure 22-4 Store Profiles Dialog Box; Dlp- A519 Apply Alarm Profiles To Ports - Cisco ONS 15454 Series Procedure Manual

DLP-A519 Apply Alarm Profiles to Ports
Figure 22-4
Click OK to store the profile.
Step 17
Note
Note
Note
Return to your originating procedure (NTP).
Step 18
DLP-A519 Apply Alarm Profiles to Ports
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Cisco ONS 15454 Procedure Guide, R5.0
22-12
Store Profiles Dialog Box
Click the Hide Identical Rows check box to configure the Alarm Profiles window to view rows
with dissimilar severities.
Click the Hide Reference Values check box to configure the Alarm Profiles window to view
severities that do not match the Default profile.
Click the Only show service-affecting severities check box to configure the Alarm Profiles
window not to display Minor and some Major alarms that will not affect service.
This task applies a custom or default alarm severity profile to a port or
ports.
None
DLP-A518 Create a New or Cloned Alarm Severity Profile, page 22-9
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Provisioning or higher
Chapter 22 DLPs A500 to A599
October 2005