Cisco ONS 15454 Series Procedure Manual page 560

Hide thumbs Also See for ONS 15454 Series:
Table of Contents

Advertisement

DLP-A170 Change Line Transmission Settings for OC-N Cards
Table 18-21
Parameter
Admin SSM Allows you to override the
PJSTSMon# Sets the STS that will be used for
Admin State Sets the port service state unless
Service
State
Cisco ONS 15454 Procedure Guide, R5.0
18-50
OC-N Card Line Settings (continued)
Description
synchronization traceability
unknown (STU) value (default
setting).
pointer justification. If set to 0,
no STS is monitored. Only one
STS can be monitored on each
OC-N port.
network conditions prevent the
change.
Identifies the autonomously
generated state that gives the
overall condition of the port.
Service states appear in the
format: Primary State-Primary
State Qualifier, Secondary State.
Chapter 18
Options
PRS: Primary Reference Source (Stratum 1)
ST2: Stratum 2
TNC: Transit node clock
ST3E: Stratum 3E
ST3: Stratum 3
SMC: SONET minimum clock
ST4: Stratum 4
0 - 3 (OC-3, per port)
0 - 12 (OC-12)
0 - 48 (OC-48)
0 - 192 (OC-192)
IS—Puts the port in-service. The port service state
changes to IS-NR.
IS,AINS—Puts the port in automatic in-service.
The port service state changes to OOS-AU,AINS.
OOS,DSBLD—Removes the port from service
and disables it. The port service state changes to
OOS-MA,DSBLD.
OOS,MT—Removes the port from service for
maintenance. The port service state changes to
OOS-MA,MT.
IS-NR—(In-Service and Normal) The port is fully
operational and performing as provisioned.
OOS-AU,AINS—(Out-Of-Service and
Autonomous, Automatic In-Service) The port is
out-of-service, but traffic is carried. Alarm
reporting is suppressed. The ONS node monitors
the ports for an error-free signal. After an
error-free signal is detected, the port stays in
OOS-AU,AINS state for the duration of the soak
period. After the soak period ends, the port service
state changes to IS-NR.
OOS-MA,DSBLD—(Out-of-Service and
Management, Disabled) The port is out-of-service
and unable to carry traffic.
OOS-MA,MT—(Out-of-Service and
Management, Maintenance) The port is
out-of-service for maintenance. Alarm reporting is
suppressed, but traffic is carried and loopbacks are
allowed.
DLPs A100 to A199
March 2007

Advertisement

Table of Contents
loading

Table of Contents