Table 15-3 Incompatibility Alarms - Cisco ONS 15454 Series Procedure Manual

Chapter 15 Maintain the Node
The 15454-SA-ANSI or 15454-SA-HD shelf assembly and 15454-FTA-3 or 15454-FTA3 fan-tray
Note
assembly are required with the ONS 15454 XC-10G, OC-192, and OC-48 any slot (AS) cards.
To replace the fan-tray assembly (FTA), it is not necessary to move any of the cable management
Note
facilities.
Review
Step 1
and note the alarms that will occur when an incompatibility occurs.
Note
Table 15-3
Shelf Assembly
—
NEBS3E or NEBS3
NEBS3E or NEBS3
NEBS3E or NEBS3
NEBS3E or NEBS3
ANSI or HD
ANSI or HD
ANSI or HD
ANSI or HD
ANSI or HD
ANSI or HD
ANSI or HD
ANSI or HD
ANSI or HD
ANSI or HD
ANSI or HD
December 2004
Table 15-3 to ensure that you have compatible components when replacing the fan-tray assembly
If you need to determine the hardware that has been installed on a node, click the Inventory tab
in node view.
Incompatibility Alarms
1 2
Fan Tray
—
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
5A
5A
5A
5A
5A
3 4
AIP 10G Cards Ethernet Cards
No fuse — —
2A No —
2A Yes —
5A No —
5A Yes —
2A No —
2A Yes 2.5G compatible
2A Yes 10G compatible
5A No Either
5A Yes 2.5G compatible
5A Yes 10G compatible
2A No Either
2A Yes 2.5G compatible
2A Yes 10G compatible
5A No Either
5A Yes Either
Cisco ONS 15454 Procedure Guide, R5.0
NTP-A288 Replace the Fan-Tray Assembly
5
Alarms
Mismatch of
Equipment Attributes
(MEA) on alarm
interface panel (AIP)
None
MEA on 10G
None
MEA on 10G
None
MEA on fan tray, AIP,
and Ethernet
MEA on fan tray and
AIP
None
MEA on fan tray and
Ethernet
MEA on fan tray
MEA on AIP
MEA on AIP and
Ethernet
MEA on AIP
None
None
15-23