Dlp- A528 Change The Default Network View Background Map - Cisco ONS 15454 Series Procedure Manual

Chapter 22 DLPs A500 to A599
Table 22-4
Parameter
Port
CV
ES
FC
SES
UAS
Note
Step 7 Return to your originating procedure (NTP).
DLP-A528 Change the Default Network View Background Map
Purpose
Tools/Equipment
Prerequisite procedures
Required/As needed
Onsite/Remote
Security Level
If you modify the background image, the change is stored in your CTC user profile on the computer. The
Note
change does not affect other CTC users.
From the Edit menu, choose Preferences > Map and check the Use Default Map check box.
Step 1
In the node view, click the Provisioning > Defaults tabs.
Step 2
In the Defaults Selector area, choose CTC and then network.
Step 3
Step 4 Choose a default map from the Default Value drop-down list. Map choices are: Germany, Japan,
Netherlands, South Korea, United Kingdom, and United States (default).
October 2005
SONET Threshold Options for DS3i-N-12 Cards
Description
(Display only.) Port number
Coding violations
Errored seconds
Failure count
Severely errored seconds
Unavailable seconds
The threshold value appears after the circuit is created.
This task changes the default map of the CTC network view.
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Superuser
DLP-A528 Change the Default Network View Background Map
Options
1 to 12
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click the Show
Thresholds button.
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click Show Thresholds.
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click Show Thresholds
(STS and VT Term).
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click Show Thresholds
(Near and Far End, Sts Term or Vt Term).
Numeric. Can be set for 15-minute or one-day intervals
for Line or Path (Near and Far End). Select the bullet
and click Show Thresholds.
Cisco ONS 15454 Procedure Guide, R5.0
22-25