Cisco ONS 15454 Series Procedure Manual page 654

DLP-A320 View ML-Series Ether Ports PM Parameters
In the Select Applicable Nodes area, uncheck any nodes where you do not want to change the user's
Step 7
settings (all network nodes are selected by default).
Click OK.
Step 8
Return to your originating procedure (NTP).
Step 9
DLP-A320 View ML-Series Ether Ports PM Parameters
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
For ML-Series card provisioning, see the Ethernet Card Software Feature and Configuration Guide for
Note
the Cisco ONS 15454 SDH, Cisco ONS 15454, and Cisco ONS 15327.
In node view, double-click the ML-Series Ethernet card where you want to view PM counts. The card
Step 1
view appears.
Click the Performance > Ether Ports tabs
Step 2
Cisco ONS 15454 Procedure Guide, R5.0
20-10
This task enables you to view ML-Series Ethernet port performance
monitoring (PM) counts at selected time intervals to detect possible
performance problems.
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Retrieve or higher
(Figure 20-1).
Chapter 20 DLPs A300 to A399
March 2005