Dlp- A372 Delete A Node From A Specified Login Node Group - Cisco ONS 15454 Series Procedure Manual

DLP-A372 Delete a Node from a Specified Login Node Group
Type the slot and port of a trunk card on the removed node.
Step 5
Click OK.
Step 6
In the Circuits tab, select all PARTIAL circuits that pass the filter and click the Delete button.
Step 7
Note
Repeat Steps
Step 8
Step 9 Log out of CTC.
Return to your originating procedure (NTP).
Step 10
DLP-A372 Delete a Node from a Specified Login Node Group
Purpose
Tools
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
From the CTC Edit menu, choose Preferences.
Step 1
Step 2 In the Preferences dialog box, click the Login Node Groups tab.
Step 3 Click the login node group tab containing the node you want to remove.
Click the node you want to remove, then click Remove.
Step 4
Click OK.
Step 5
Return to your originating procedure (NTP).
Step 6
Cisco ONS 15454 Procedure Guide, R5.0
20-56
To select more than one circuit, press the Ctrl key while clicking on all circuits to be deleted.
3 through 7 for the other trunk card.
This task removes a node from a specified login node group. To remove a
node from the current login node group, see the
from the Current Session or Login Group" task on page
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Provisioning or higher
Chapter 20 DLPs A300 to A399
"DLP-A339 Delete a Node
20-30.
March 2005