Table 20-9 Line Threshold Options For Ds3/Ec1-48 Card; Table 20-10 Electrical Path Threshold Options For The Ds3/Ec1-48 Card - Cisco ONS 15454 Series Procedure Manual

Hide thumbs Also See for ONS 15454 Series:
Table of Contents

Advertisement

Chapter 20
DLPs A300 to A399
Table 20-8
Parameter
Line Length Defines the distance (in feet) from
AINS Soak
Table 20-9
Table 20-9
Parameter
Port
CV
ES
SES
LOSS
Table 20-10
card.
Table 20-10
Parameter
Port
CV
ES
March 2005
Line Options for the DS3/EC1-48Card (continued)
Description
backplane connection to the next
termination point.
Sets the automatic in-service soak period. Duration of valid input signal, in hh.mm
describes the values on the Provisioning > Line Thresholds tabs for the DS3/EC1-48 card.
Line Threshold Options for DS3/EC1-48 Card
Description
Port number
Coding violations
Errored seconds
Severely errored seconds
Loss of signal seconds; number of
one-second intervals containing one or
more LOS defects
describes the values on the Provisioning > Elect Path Thresholds tabs for the DS3/EC1-48
Electrical Path Threshold Options for the DS3/EC1-48 Card
Description
(Display only.) Port number
Coding violations
Errored seconds
DLP-A388 Change Line and Threshold Settings for the DS3/EC1-48 Cards
Options
0 - 225 (default)
226 - 450
format, after which the card becomes in
service (IS) automatically 0 to 48 hours,
15-minute increments
Options
1 to 48 (read-only)
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and click
Show Thresholds.
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and click
Show Thresholds.
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and click
Show Thresholds.
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and click
Show Thresholds.
Options
1 to 48
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and click
Show Thresholds (Pbit Near End only;
CPbit, Near and Far End).
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and click
Show Thresholds (Pbit Near End only;
CPbit, Near and Far End).
Cisco ONS 15454 Procedure Guide, R5.0
20-83

Advertisement

Table of Contents
loading

Table of Contents