Ntp- A71 Create, Download, And Assign Alarm Severity Profiles - Cisco ONS 15454 Series Procedure Manual

Chapter 7 Manage Alarms
Note
Stop. You have completed this procedure.
NTP-A71 Create, Download, and Assign Alarm Severity Profiles
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Step 1 Complete the
alarm profile. If you are already logged in, continue with
profile, or go to
Complete the
Step 2
clones a current alarm profile, renames the profile, and customizes the new profile.
Complete the
Step 3
downloads an alarm severity profile from a CD or a node.
Note
As necessary, complete the
Step 4
"DLP-A117 Apply Alarm Profiles to Cards and Nodes" task on page
As necessary, complete the
Step 5
Stop. You have completed this procedure.
December 2004
A blank LCD results when the fuse on the alarm interface panel (AIP) board has blown. If this
occurs, contact your next level of support. For information, see the
Obtaining Support, and Security Guidelines" section on page
Use this procedure to create a customized alarm profile at the network,
node, or card level. This procedure also provides links to tasks that
describe how to assign custom severities individually to each port, card, or
node, and to delete alarm profiles.
None
As needed
Onsite or remote
Provisioning or higher
"DLP-A60 Log into CTC" task on page 17-66
Step 3 to download an alarm profile.
"DLP-A518 Create a New or Cloned Alarm Severity Profile" task on page
"DLP-A524 Download an Alarm Severity Profile" task on page
After storing a created or downloaded alarm profile, you must go to the node (either by logging
into it or clicking on it from the network view) and activate the profile by applying it to the shelf,
one or more cards, or one or more ports.
"DLP-A519 Apply Alarm Profiles to Ports" task on page 22-12
"DLP-A520 Delete Alarm Severity Profiles" task on page
NTP-A71 Create, Download, and Assign Alarm Severity Profiles
"Obtaining Documentation,
lvi.
at the node where you want to create an
Step 2 to create, clone or modify an alarm
18-5.
Cisco ONS 15454 Procedure Guide, R5.0
22-9. This task
22-20. This task
or the
22-14.
7-7