Ntp- A165 Import Network Element Defaults - Cisco ONS 15454 Series Procedure Manual

NTP-A165 Import Network Element Defaults
Under Defaults Selector, choose a card type (if editing card-level defaults), CTC (if editing CTC
Step 3
defaults), or NODE (if editing node-level defaults). Clicking on the node name (at the top of the Defaults
Selector column) lists all available NE defaults in the Default Name column. To selectively display just
the defaults for a given card type, for node-level, or for CTC-level, you can drill down the Defaults
Selector menu structure.
Locate a default you want to change under Default Name.
Step 4
Step 5 Click in the Default Value column for the default property you are changing and either choose a value
from the drop-down menu (when available), or type in the desired new value.
Note
Click Apply (click in the Default Name column to activate the Apply button if it is unavailable). You
Step 6
can modify multiple default values before applying the changes.
A pencil icon will appear next to any default value that will be changed as a result of editing the defaults
file.
Step 7 If you are modifying node-level defaults, a dialog box appears telling you that applying defaults for node
level attributes overrides current provisioning and asks if you want to continue. Click Yes.
If you are modifying the IIOP Listener Port setting, a dialog box appears warning you that the node will
reboot and asks if you want to continue. Click Yes.
Note
Note
Stop. You have completed this procedure.
NTP-A165 Import Network Element Defaults
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Cisco ONS 15454 Procedure Guide, R5.0
15-36
If you click Reset before you click Apply, all values will return to their original settings.
Changes to node settings take effect when you click Apply. Changes made to card settings using
the Defaults Editor do not change the settings for cards that are already installed or slots that are
pre-provisioned for cards. To change settings for installed cards or pre-provisioned slots, see
Chapter 11, "Change Card Settings."
Changes to the IIOP Listener Port setting cause the TCC2/TCC2P card to reboot.
This procedure imports the NE defaults using the NE Defaults Editor. The
defaults can either be imported from the CTC software CD (factory
defaults) or from a customized file exported and saved from a node.
None
As needed
Onsite or remote
Superuser
Chapter 15 Maintain the Node
December 2004