Ntp- A199 Locate And View Circuits - Cisco ONS 15454 Series Procedure Manual

NTP-A199 Locate and View Circuits
NTP-A199 Locate and View Circuits
Purpose
Tools/Equipment
Prerequisite Procedures Circuit creation procedure(s) in
Required/As Needed
Onsite/Remote
Security Level
Step 1 Complete the
to view the circuits. If you are already logged in, continue with Step 2.
Note
Step 2 As needed, complete the
As needed, complete the
Step 3
As needed, complete the
Step 4
As needed, complete the
Step 5
As needed, complete the
Step 6
As needed, complete the
Step 7
Stop. You have completed this procedure.
NTP-A200 View Cross-Connect Card Resource Usage
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 Complete the
cross-connect card resource usage. If you are already logged in, continue with Step 2.
Click the Maintenance > Cross-Connect > Resource Usage tabs.
Step 2
Cisco ONS 15454 Procedure Guide, R5.0
9-2
This procedure allows you to locate and view circuits and spanning tree
information.
None
Tunnels"
As needed
Onsite or remote
Retrieve or higher
"DLP-A60 Log into CTC" task on page 17-66
Do not check Disable Circuit Management in the Login dialog box. No circuits appear if this
option is checked.
"DLP-A416 View Circuit Information" task on page
"DLP-A131 Search for Circuits" task on page
"DLP-A262 Filter the Display of Circuits" task on page
"DLP-A229 View Circuits on a Span" task on page
"DLP-A417 View the BLSR Squelch Table" task on page
"DLP-A430 View Spanning Tree Information" task on page
This procedure allows you to view the percentage of cross-connect card
resources used by circuits that traverse or terminate at an ONS 15454.
XCVT or XC10G cards must be installed.
DLP-A37 Install the XCVT or XC10G Cards, page 17-45
As needed
Onsite or remote
Retrieve or higher
"DLP-A60 Log into CTC" task on page 17-66
Chapter 9
Chapter 6, "Create Circuits and VT
at a node on the network where you want
21-2.
18-14.
19-44.
19-18.
21-5.
21-9.
at the node where you want to view the
Manage Circuits
December 2004