DLP-A168 Change Line and Threshold Settings for the DS3XM-6 Card
Table 18-15
Parameter
SD BER
Line Type
Line Coding
Line Length
Admin State
Cisco ONS 15454 Procedure Guide, R5.0
18-42
Line Options for the DS3XM-6 Parameters (continued)
Description
Sets the signal degrade bit error
rate.
Defines the line framing type.
Defines the DS-1 transmission
coding type that is used.
Defines the distance (in feet)
from backplane connection to
the next termination point.
Sets the port service state unless
network conditions prevent the
change.
Chapter 18
Options
1E-5
•
1E-6
•
1E-7
•
1E-8
•
1E-9
•
M13 - default
•
C BIT
•
B3ZS
0 - 225 (default)
•
226 - 450
•
IS—Puts the port in-service. The port service
•
state changes to IS-NR.
IS,AINS—Puts the port in automatic in-service.
•
The port service state changes to
OOS-AU,AINS.
OOS,DSBLD—Removes the port from service
•
and disables it. The port service state changes to
OOS-MA,DSBLD.
OOS,MT—Removes the port from service for
•
maintenance. The port service state changes to
OOS-MA,MT.
DLPs A100 to A199
March 2007