Dlp- A393 View Ce-Series Ether Ports And Pos Ports History Pm Parameters - Cisco ONS 15454 Series Procedure Manual

DLP-A393 View CE-Series Ether Ports and POS Ports History PM Parameters
DLP-A393 View CE-Series Ether Ports and POS Ports History PM Parameters
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the CE-Series Ethernet card where you want to view PM counts. The card
Step 1
view appears.
Click the Performance > Ether Ports > History tabs
Step 2
History tabs.
Figure 20-20
Ether ports
Click Refresh. Performance monitoring statistics for each port on the card appear.
Step 3
View the PM parameter names that appear in the Param column. The PM parameter values appear in the
Step 4
Prev-n columns. For PM parameter definitions, refer to the "Performance Monitoring" chapter in the
Cisco ONS 15454 Troubleshooting Guide.
Cisco ONS 15454 Procedure Guide, R5.0
20-90
This task enables you to view CE-Series Ether Ports and POS Ports
history PM counts at selected time intervals to detect possible
performance problems.
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Retrieve or higher
Ether Ports History on the CE-Series Card View Performance Window
History Performance
tab tab tab
Interval Refresh
drop-down list button
(Figure
Card
view
Help
button
Chapter 20 DLPs A300 to A399
20-20) Performance > POS Ports >
March 2005