Figure 20-24 Ubic-H Alignment Pins - Cisco ONS 15454 Series Procedure Manual

Chapter 20 DLPs A300 to A399
Figure 20-24 UBIC-H Alignment Pins
Do not force the UBIC-H EIA onto the shelf if you feel strong resistance.
Caution
Locate the three jack screws on the UBIC-H
Step 7
thumbscrew a few turns and move to the next one, turning each thumb screw a few turns at a time until
all three screws are hand tight
Tightening the jack screws unevenly could cause damage to the UBIC-H connectors.
Caution
March 2005
UBIC alignment pins
(Figure
(Figure 20-26).
DLP-A399 Install a UBIC-H EIA
20-25). Starting with any jack screw, tighten the
Cisco ONS 15454 Procedure Guide, R5.0
20-99