Figure 1-10 Mounting Holes On The All Other Eia Types - Cisco ONS 15454 Series Procedure Manual

NTP-A11 Install the Rear Cover
Figure 1-10 Mounting Holes on the All Other EIA Types
B-side
mounting
locations
Use a 5/16-inch nutdriver to install the extended standoffs in the mounting holes.
Step 4
Step 5 Locate the TOP designation on one of the mounting bars (700-19701-XX) and align the appropriate
holes for your EIA with the extended standoffs
Cisco ONS 15454 Procedure Guide, R5.0
1-26
Chapter 1 Install the Shelf and Backplane Cable
(Figure 1-11).
A-side
mounting
locations
March 2005