Ntp- A162 Replace The Ubic-V Eia - Cisco ONS 15454 Series Procedure Manual

Chapter 15 Maintain the Node
NTP-A162 Replace the UBIC-V EIA
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
To remove the lower backplane cover, loosen and remove the five screws that secure it to the ONS 15454
Step 1
and pull it away from the shelf assembly
Figure 15-12
Loosen and remove the six perimeter screws that hold the sheet metal cover and UBIC-V in place
Step 2
(Figure
December 2004
This procedure replaces the UBIC-V EIA.
#2 Phillips screwdriver
Small slot-head screwdriver
Replacement UBIC-V EIA and accompanying screws
None
As needed
Onsite
None
ONS 15454 Rear View (with Sheet Metal Covers Attached)
B
15-13).
(Figure 15-12).
A
Cisco ONS 15454 Procedure Guide, R5.0
NTP-A162 Replace the UBIC-V EIA
Backplane Sheet Metal
Covers
Lower Backplane
Cover
15-33