Ether Ports Utilization On The Ce-Series Card View Performance Window - Cisco ONS 15454 Series Procedure Manual

Chapter 20 DLPs A300 to A399
Figure 20-19
Ether ports
Click Refresh. Performance monitoring statistics for each port on the card appear.
Step 3
View the Port # column to find the port you want to monitor.
Step 4
Step 5 The Tx and Rx bandwidth utilization values for the previous time intervals appear in the Prev-n columns.
For PM parameter definitions, refer to the "Performance Monitoring" chapter in the Cisco ONS 15454
Troubleshooting Guide.
Note
Return to your originating procedure (NTP).
Step 6
March 2005

Ether Ports Utilization on the CE-Series Card View Performance Window

Utilization Performance
tab tab
Interval Refresh
drop-down list button
To refresh, reset, or clear PM counts, see the
on page 8-2.
DLP-A392 View CE-Series Ether Ports and POS Ports Utilization PM Parameters
Card
tab view
Help
button
"NTP-A253 Change the PM Display" procedure
Cisco ONS 15454 Procedure Guide, R5.0
20-89