Chapter 6 Create Circuit And Vt Tunnel - Cisco ONS 15454 Series Procedure Manual

Hide thumbs Also See for ONS 15454 Series:
Table of Contents

Advertisement

Before You Begin
NTP-A257 Create an Automatically Routed OC-N Circuit, page
12.
NTP-A295 Create a Manually Routed OC-N Circuit, page
13.
NTP-A314 Create a Unidirectional OC-N Circuit with Multiple Drops, page
14.
needed.
NTP-A62 Test OC-N Circuits, page
15.
(OC-N) circuit.
NTP-A139 Create a Half Circuit on a BLSR or 1+1 Node, page
16.
needed to create a half circuit using an OC-N as a destination in a bidirectional line switch ring
(BLSR) or 1+1 topology.
NTP-A140 Create a Half Circuit on a Path Protection Node, page
17.
create a half circuit using an OC-N as a destination in a path protection.
NTP-A191 Create an E-Series EtherSwitch Circuit (Multicard or Single-Card Mode), page
18.
6-56—Complete as needed.
NTP-A192 Create a Circuit for an E-Series Card in Port-Mapped Mode, page
19.
needed.
NTP-A142 Create an E-Series Shared Packet Ring Ethernet Circuit, page
20.
needed.
NTP-A143 Create an E-Series Hub-and-Spoke Ethernet Configuration, page
21.
needed.
NTP-A144 Create an E-Series Single-Card EtherSwitch Manual Cross-Connect, page
22.
6-66—Complete as needed.
NTP-A145 Create an E-Series Multicard EtherSwitch Manual Cross-Connect, page
23.
6-69—Complete as needed.
NTP-A146 Test E-Series Circuits, page
24.
SONET circuits.
25.
NTP-A147 Create a G-Series STS Circuit, page
NTP-A148 Create a Manual Cross-Connect for a G-Series or E-Series Card in Port-Mapped Mode,
26.
page
NTP-A241 Provision G-Series Ports for Transponder Mode (Tx Mode), page
27.
needed.
NTP-A149 Test G-Series Circuits, page
28.
SONET circuits.
NTP-A304 Provision CE-100T-8 Ethernet Ports, page
29.
NTP-A305 Provision CE-100T-8 POS Ports, page
30.
NTP-A194 Create Overhead Circuits, page
31.
communications channel (DCC) tunnels or IP-encapsulated tunnels, provision orderwire, or create
user data channel (UDC) circuits.
NTP-A264 Create an Automatically Routed VCAT Circuit, page
32.
NTP-A265 Create a Manually Routed VCAT Circuit, page
33.
NTP-A167 Create an STS Test Circuit around the Ring, page
34.
Table 6-1
Cisco ONS 15454 Procedure Guide, R5.0
6-2
6-76—Complete as needed.
defines ONS 15454 circuit creation terms and options.
6-43—Complete as needed.
6-51—Complete this procedure after you create an optical
6-72—Complete this procedure after creating E-Series
6-73—Complete as needed.
6-81—Complete this procedure after creating G-Series
6-82—Complete as needed.
6-84—Complete as needed.
6-85—Complete as needed to create data
6-90—Complete as needed.
6-93—Complete as needed.
Chapter 6
Create Circuits and VT Tunnels
6-38—Complete as needed.
6-46—Complete as
6-52—Complete this procedure as
6-54—Complete as needed to
6-59—Complete as
6-61—Complete as
6-64—Complete as
6-78—Complete as
6-86—Complete as needed.
August 2005

Advertisement

Table of Contents
loading

Table of Contents