Dlp- A159 Delete A User From A Single Node - Cisco ONS 15454 Series Procedure Manual

DLP-A159 Delete a User from a Single Node
DLP-A159 Delete a User from a Single Node
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
You cannot delete a user who is currently logged in. To log out a user, you can complete the
Note
Log Out a User on a Single Node" task on page
option in the Delete User dialog box.
CTC will allow you to delete other Superusers if one Superuser remains. For example, you can delete
Note
the CISCO15 user if you have created another Superuser. Use this option with caution.
In node view, click the Provisioning > Security > Users tabs.
Step 1
Choose the user you want to delete.
Step 2
Click Delete.
Step 3
In the Delete User dialog box, verify that the user name displayed is the one you want to delete.
Step 4
Click OK. Confirm that the changes appear; if not, repeat the task.
Step 5
Return to your originating procedure (NTP).
Step 6
DLP-A160 Change User Password and Security Level on Multiple Nodes
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
You must add the same user name and password to each node the user will access.
Note
From the View menu, choose Go to Network View. Verify that you can access all the nodes where you
Step 1
want to add users.
Click the Provisioning > Security > Users tabs. Highlight the user's name whose settings you want to
Step 2
change.
Cisco ONS 15454 Procedure Guide, R5.0
18-26
This task deletes an existing user from a single node.
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Superuser
20-9, or you can choose the "Logout before delete"
This task changes settings for an existing user at multiple nodes.
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Superuser
Chapter 18 DLPs A100 to A199
"DLP-A315
March 2007