Table 20-4 Ds1 Options For The Ds3Xm-12 Card - Cisco ONS 15454 Series Procedure Manual

DLP-A387 Change Line and Threshold Settings for the DS3XM-12 Card
Table 20-3
Parameter
Line Length
Admin State
Table 20-4
Cisco ONS 15454 Reference Manual for more information about portless protection on DS3XM-12
cards.
Table 20-4
Parameter
Port
Port Name
Cisco ONS 15454 Procedure Guide, R5.0
20-76
Line Options for the DS3XM-12 Parameters (continued)
Description
Defines the distance (in feet) from
backplane connection to the next
termination point.
Sets the port service state unless network
conditions prevent the change.
describes the values on the Provisioning > DS1 tabs for the DS3XM-12 cards. Refer to the
DS1 Options for the DS3XM-12 Card
Description
(Display only.) Display the port
number by DS-3 and corresponding
DS-1.
Displays the port name.
Chapter 20
Options
0 - 225 (default)
•
226 - 450
•
IS—Puts the port in-service. The port
•
service state changes to IS-NR.
IS,AINS—Puts the port in automatic
•
in-service. The port service state
changes to OOS-AU,AINS.
OOS,DSBLD—Removes the port
•
from service and disables it. The port
service state changes to
OOS-MA,DSBLD.
• OOS,MT—Removes the port from
service for maintenance. The port
service state changes to
OOS-MA,MT.
Options
DS-3: 1 – 35
DS-1: 1 – 28
User-defined, up to 32 alphanumeric/ special
characters. Blank by default.
See the "DLP-A314 Assign a Name to a
Port" task on page 20-8.
DLPs A300 to A399
March 2005