Cisco ONS 15454 Series Procedure Manual page 771

Chapter 21 DLPs A400 to A499
Remove the GBIC or SFP from its protective packaging.
Step 1
Check the label to verify that the GBIC or SFP is the correct type for your network.
Step 2
Table 21-6
Note
Table 21-6
GBIC
1000BaseSX
1000BaseLX E1000-2-G
1000BaseZX G1000-4
Table 21-7
Table 21-7
SFP
1000BaseSX ML1000-2 Short reach
1000BaseLX ML1000-2 Long reach
Verify the type of GBIC or SFP you are using:
Step 3
If you are using a GBIC with clips, go to
•
If you are using a GBIC with a handle, go to
•
If you are using an SFP, go to
•
For GBICs with clips:
Step 4
a. Grip the sides of the GBIC with your thumb and forefinger and insert the GBIC into the slot on the
card.
Note
Slide the GBIC through the flap that covers the opening until you hear a click. The click indicates
b.
the GBIC is locked into the slot.
March 2005
shows the available GBICs.
The GBICs are very similar in appearance. Check the GBIC label carefully before installing it.
Available GBICs
Associated
Cards Application
E1000-2-G Short reach
G1000-4
G1K-4
Long reach
G1000-4
G1K-4
Extra long reach
G1K-4
FC_MR-4 Long reach
FC_MR-4 Intermediate reach Multimode fiber, 850 nm
shows the available SFPs.
Available SFPs
Associated
Cards Application
GBICs are keyed to prevent incorrect installation.
Fiber
Multimode fiber up to 550 m
long
Single-mode fiber up to
5 km long
Single-mode fiber up to
70 km long
Single-mode fiber, 1310 nm ONS-GX-2FC-SML=
Fiber
Multimode fiber up to 550 m long 15454E-SFP-LC-SX=
Single-mode fiber up to 5 km long 15454E-SFP-LC-LX=
Step 4.
Step 5.
Step 6.
Cisco ONS 15454 Procedure Guide, R5.0
DLP-A469 Install GBIC or SFP Connectors
Product Number
15454E-GBIC-SX=
15454E-GBIC-LX=
15454E-GBIC-ZX=
ONS-GX-2FC-MMI=
Product Number
21-25