Cisco ONS 15454 Series Procedure Manual page 127

Hide thumbs Also See for ONS 15454 Series:
Table of Contents

Advertisement

Turn Up Network
The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms
Note
do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration.
Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's
path protection feature, which may be used in any topological network configuration. Cisco does not
recommend using its path protection feature in any particular topological network configuration.
This chapter explains how to turn up and test Cisco ONS 15454 networks, including point-to-point
networks, linear add-drop multiplexers (ADMs), path protection configurations, and bidirectional line
switched rings (BLSRs).
Before You Begin
This section lists the chapter procedures (NTPs). Turn to a procedure for applicable tasks (DLPs).
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
December 2004
NTP-A35 Verify Node Turn-Up, page
turn-up.
NTP-A124 Provision a Point-to-Point Network, page
NTP-A173 Point-to-Point Network Acceptance Test, page
provision a point-to-point network.
NTP-A38 Provision a Linear ADM Network, page
NTP-A174 Linear ADM Network Acceptance Test, page
provision a linear ADM.
NTP-A40 Provision BLSR Nodes, page
in a two-fiber or four-fiber BLSR.
NTP-A126 Create a BLSR, page
nodes.
NTP-A175 Two-Fiber BLSR Acceptance Test, page
a two-fiber BLSR.
NTP-A176 Four-Fiber BLSR Acceptance Test, page
create a four-fiber BLSR.
NTP-A178 Provision a Traditional BLSR Dual-Ring Interconnect, page
this procedure after you provision a BLSR.
C H A P T E R
5-2—Complete this procedure before beginning network
5-3—Complete as needed.
5-4—Complete this procedure after you
5-6—Complete as needed.
5-8—Complete this procedure after you
5-10—Complete this procedure to provision ONS 15454s
5-12—Complete this procedure after you provision the BLSR
5-13—Complete this procedure after you create
5-15—Complete this procedure after you
Cisco ONS 15454 Procedure Guide, R5.0
5
5-17—As needed, complete
5-1

Advertisement

Table of Contents
loading

Table of Contents