Ntp- A300 Viewing The Audit Trail Records - Cisco ONS 15454 Series Procedure Manual

Chapter 15 Maintain the Node
Cisco recommends that you save the node database to safe location if you will not be restoring the node
Caution
using the database provided on the software CD.
To avoid a node IP and secure IP ending up in the same domain after restoring a database, ensure that
Caution
the node IP stored in the database differs in domain from that of the node in repeater mode. Also, after
restoring a database, ensure that the node IP and secure IP differ in domain.
The following parameters are not backed up and restored when you delete the database and restore the
Note
factory settings: node name, IP address, subnet mask and gateway, and IIOP port. If you change the node
name and then restore a backed up database with a different node name, the circuits map to the new
renamed node. Cisco recommends keeping a record of the old and new node names.
If you need to install or replace one or more TCC2/TCC2P cards, see the
Step 1
TCC2/TCC2P Cards" task on page
If you are using Microsoft Windows, complete the
Step 2
Database and Upload Software (Windows)" task on page
If you are using UNIX, complete the
Step 3
and Upload Software (UNIX)" task on page
Stop. You have completed this procedure.
NTP-A300 Viewing the Audit Trail Records
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
trail log. If you are already logged in, continue with
Step 2 In the node view, click the Maintenance > Audit tabs.
Click Retrieve.
Step 3
A window containing the most recent Audit Trail records appears as shown in
December 2004
17-42.
"DLP-A245 Use the Reinitialization Tool to Clear the Database
This procedure describes how to view Audit Trail records. Audit trail
records are useful for maintaining security, recovering lost transactions, and
enforcing accountability. Accountability refers to tracing user activities;
that is, associating a process or action with a specific user.
None
As needed
Onsite or remote
Provisioning
"DLP-A60 Log into CTC" task on page 17-66
NTP-A300 Viewing the Audit Trail Records
"DLP-A244 Use the Reinitialization Tool to Clear the
19-25.
19-27.
at the node where you want to view the audit
Step 2.
Cisco ONS 15454 Procedure Guide, R5.0
"DLP-A36 Install the
Figure 15-4.
15-9