Dlp- A169 Change Line And Threshold Settings For The Ec1-12 Card - Cisco ONS 15454 Series Procedure Manual

Chapter 18 DLPs A100 to A199
Table 18-18
Parameter
FC
SES
UAS
Note
Return to your originating procedure (NTP).
Step 7
DLP-A169 Change Line and Threshold Settings for the EC1-12 Card
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the EC-1 card where you want to change the line or threshold settings.
Step 1
Click the Provisioning tab.
Step 2
Depending on the setting you need to modify, click the Line, SONET Thresholds, or SONET STS tabs.
Step 3
Note
Note
Modify any of the settings found under these subtabs. For definitions of the Line settings, see
Step 4
Table
modifying SONET STS settings, see the
Performance Monitoring" task on page
March 2007
SONET Threshold Options for the DS3XM-6 Card (continued)
Description
Failure count
Severely errored seconds
Unavailable seconds
The threshold value appears after the circuit is created.
This task changes the line and threshold settings for the EC1-12 (EC-1)
card.
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Provisioning or higher
See Chapter 7, "Manage Alarms"
The STS subtab is used to provision IPPM. To provision IPPM, circuits must be provisioned on
the EC1-12 card. For circuit creation procedures, go to
Tunnels."
18-19. For definitions of the SONET Threshold settings, see
DLP-A169 Change Line and Threshold Settings for the EC1-12 Card
Options
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and click
Show Thresholds (STS and VT Term).
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and click
Show Thresholds (STS and VT Term).
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and click
Show Thresholds (STS and VT Term).
for information about the Alarm Behavior tab.
Chapter 6, "Create Circuits and VT
"DLP-A121 Enable/Disable Pointer Justification Count
18-7.
Cisco ONS 15454 Procedure Guide, R5.0
Table 18-20. For information on
18-45