DLP-A111 Changing the Maximum Number of Session Entries for Alarm History
Figure 18-1
Click the up or down arrow buttons next to the Maximum History Entries field to change the entry.
Step 2
Click Apply and OK.
Step 3
Note
Note
Return to your originating procedure (NTP).
Step 4
Cisco ONS 15454 Procedure Guide, R5.0
18-2
CTC Preferences Dialog Box
Setting the Maximum History Entries value to the high end of the range uses more Cisco
Transport Controller (CTC) memory and could impair CTC performance.
This task changes the maximum history entries recorded for CTC sessions. It does not affect the
maximum number of history entries viewable for a network, node, or card.
Chapter 18
DLPs A100 to A199
March 2007