Dlp- A269 Enable Dialog Box Do-Not-Display Option - Cisco ONS 15454 Series Procedure Manual

Hide thumbs Also See for ONS 15454 Series:
Table of Contents

Advertisement

Chapter 19
DLPs A200 to A299
If you need to reposition the node icons, drag and drop them one at a time to a new location on the map.
Step 8
If you want to change the magnification of the icons, right-click the network view and choose Zoom In.
Step 9
Repeat until the ONS 15454 icons are displayed at the magnification you want.
Return to your originating procedure (NTP).
Step 10
DLP-A269 Enable Dialog Box Do-Not-Display Option
Purpose
Tools/Equipment
Prerequisite procedures
Required/As needed
Onsite/Remote
Security Level
If any user who has rights to perform an operation (for example, creating a circuit) selects the "Do not
Note
show this dialog again" check box in a dialog box, the dialog box is not displayed for any other users
who perform that operation on the network from the same computer unless the command is overridden
using the following task. (The preference is stored on the computer, not in the node database.)
From the Edit menu, choose Preferences.
Step 1
In the Preferences dialog box, click the General tab.
Step 2
The Preferences Management area field lists all dialog boxes where "Do not show this dialog again" is
enabled.
Choose one of the following options, or uncheck the individual dialog boxes that you want to appear:
Step 3
Click OK.
Step 4
Step 5
Return to your originating procedure (NTP).
DLP-A271 Change Security Policy on a Single Node
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
September 2005
This task ensures that a user-selected "Do not display" dialog box
preference is enabled for subsequent sessions. It can also be used to disable
the do not display option.
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Provisioning or higher
Don't Show Any—Hides all do-not-display check boxes.
Show All—Overrides do-not-display check box selections and displays all dialog boxes.
This task changes the security policy for a single node, including idle user
timeouts, user lockouts, password changes, and concurrent login policies.
None
DLP-A60 Log into CTC, page 17-66
As needed
DLP-A269 Enable Dialog Box Do-Not-Display Option
Cisco ONS 15454 Procedure Guide, R5.0
19-53

Advertisement

Table of Contents
loading

Table of Contents