Dlp- A352 View Fc_Mr-4 History Pm Parameters - Cisco ONS 15454 Series Procedure Manual

DLP-A352 View FC_MR-4 History PM Parameters
Figure 20-7
Card View
Performance
Utilization
Click Refresh. Performance monitoring utilization values for each port on the card appear.
Step 3
View the Port # column to find the port you want to monitor.
Step 4
The transmit (Tx) and receive (Rx) bandwidth utilization values for the previous time intervals appear
Step 5
in the Prev-n columns. For PM parameter definitions, refer to the "Performance Monitoring" chapter in
the Cisco ONS 15454 Troubleshooting Guide.
Return to your originating procedure (NTP).
Step 6
DLP-A352 View FC_MR-4 History PM Parameters
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the FC_MR-4 card where you want to view PM counts. The card view
Step 1
appears.
Cisco ONS 15454 Procedure Guide, R5.0
20-38
FC_MR-4 Utilization on the Card View Performance Window
tab
tab
Interval
drop-down list
This task enables you to view historical PM counts at selected time
intervals on an FC_MR-4 card and port to detect possible performance
problems.
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Retrieve or higher
Refresh
button
Chapter 20 DLPs A300 to A399
March 2005