Table Display Options - Cisco ONS 15454 Series Procedure Manual

Appendix A CTC Information and Shortcuts
Table A-6
Action
Update circuits with
new node
Display a link end
point
Display span
properties
Perform a path
protection protection
switch for an entire
span
Display DWDM span
properties
Upgrade a span

Table Display Options

Right-clicking a table column displays a menu.
rearranging or hiding CTC table columns and sorting table columns by primary or secondary keys.
Table A-7
Task
Resize column
Rearrange column order Click while dragging the column
Reset column order
Hide column
Show column
Display all hidden
columns
Sort table (primary)
December 2004
Network Management Tasks in Network View (continued)
Task
Right-click a node and choose Update Circuits With New Node from the
shortcut menu. Use this command when you add a new node and want to pass
circuits through it.
Right-click a span. From the shortcut menu, choose Go To [<node> | <port> |
<slot>] for the drop port you want to view. CTC displays the card in card view.
Do any of the following:
• Move the mouse over a span; the properties appear near the span.
• Click a span; the properties appear in the upper left corner of the window.
Right-click a span; the properties appear at the top of the shortcut menu.
•
Right-click a network span and click Circuits. In the Circuits on Span dialog
box, switch options appear in the path protection Span Switching field.
Right-click a DWDM network span and click Circuits. The optical channel
network connection (OCHNC), optical direction, and circuit appear.
Right-click a span and choose Upgrade Span from the shortcut menu.
For detailed span upgrade information and instructions, see
Note
Chapter 12, "Upgrade Cards and Spans."
Table Display Options
Click
Click while dragging the column
separator to the right or left.
header to the right or left.
—
—
—
—
Click a column header; each click
changes sort order (ascending or
descending).
Table A-7 shows table display options, which include
Right-Click Shortcut Menu
—
—
Choose Reset Columns
Order/Visibility.
Choose Hide Column.
Choose Show Column > column_name.
Choose Reset Columns
Order/Visibility.
Choose Sort Column.
Cisco ONS 15454 Procedure Guide, R5.0
Manage the CTC Window
A-11