Ntp- A205 Modify Users And Change Security - Cisco ONS 15454 Series Procedure Manual

NTP-A205 Modify Users and Change Security
If you need to verify timing after removing a node from a BLSR or path protection, see the
Step 5
Verify Timing in a Reduced Ring" task on page
Complete the
Step 6
Stop. You have completed this procedure.
NTP-A205 Modify Users and Change Security
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Step 2.
Complete the
Step 2
Perform any of the following tasks as needed:
Step 3
•
•
•
•
•
•
•
Complete the
Step 4
Stop. You have completed this procedure.
NTP-A87 Change SNMP Settings
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Cisco ONS 15454 Procedure Guide, R5.0
10-6
"NTP-A108 Back Up the Database" procedure on page
This procedure modifies user and security properties for the ONS 15454.
None
NTP-A30 Create Users and Assign Security, page 4-4
As needed
Onsite or remote
Superuser
"DLP-A60 Log into CTC" task on page
"NTP-A108 Back Up the Database" procedure on page
DLP-A271 Change Security Policy on a Single Node, page 19-53
DLP-A272 Change Security Policy on Multiple Nodes, page 19-55
DLP-A511 Change Node Access and PM Clearing Privilege, page 22-4
DLP-A158 Change User Password and Security Level on a Single Node, page 18-25
DLP-A160 Change User Password and Security Level on Multiple Nodes, page 18-26
DLP-A159 Delete a User from a Single Node, page 18-26
DLP-A161 Delete a User from Multiple Nodes, page 18-27
"NTP-A108 Back Up the Database" procedure on page
This procedure modifies SNMP settings for the ONS 15454.
None
NTP-A256 Set Up SNMP, page 4-12
As needed
Onsite or remote
Provisioning or higher
Chapter 10
18-67.
15-4.
17-66. If you are already logged in, continue with
15-4.
15-4.
Change Node Settings
"DLP-A195
December 2004