Figure 17-7 Installing The Smb Eia (Use A Balun For Ds-1 Connections); Dlp- A14 Install The Amp Champ Eia - Cisco ONS 15454 Series Procedure Manual

DLP-A14 Install the AMP Champ EIA
Figure 17-7 Installing the SMB EIA (Use a Balun for DS-1 Connections)
SMB EIA
Foil EMI gasket
(Note: Might ship already
installed on the SMB EIA)
Metal SMB cover panel
Step 6 Return to your originating procedure (NTP).
DLP-A14 Install the AMP Champ EIA
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Cisco ONS 15454 Procedure Guide, R5.0
17-16
This task installs an AMP Champ EIA. Use an AMP Champ EIA if you are
using DS1-14 cards and prefer an AMP interface to an SMB interface.
#2 Phillips screwdriver
Medium slot-head screwdriver
Small slot-head screwdriver
9 perimeter screws
12 inner screws
5 backplane cover screws
6 AMP Champ cards
EIA panel
As needed
Onsite
None
Chapter 17 DLPs A1 to A99
March 2005