Table 18-22 Oc-N Threshold Options - Cisco ONS 15454 Series Procedure Manual

DLP-A171 Change Threshold Settings for OC-N Cards
Table 18-22
Parameter
ES
SES
SEFS
FC
UAS
PSC
PSD
PSC-W
PSD-W
PSC-S
PSD-S
Cisco ONS 15454 Procedure Guide, R5.0
18-52
OC-N Threshold Options (continued)
Description
Errored seconds
Severely errored seconds
Severely errored framing seconds
Failure count
Unavailable seconds
Protection Switching Count (Line)
Protection Switch Duration (Line)
Protection Switching Count - Working line
BLSR is not supported on the OC-3 card;
therefore, the PSC-W, PSC-S, and PSC-R
PM parameters do not increment.
Protection Switching Duration - Working
line
BLSR is not supported on the OC-3 card;
therefore, the PSD-W, PSD-S, and PSD-R
PM parameters do not increment.
Protection Switching Duration - Span
BLSR is not supported on the OC-3 card;
therefore, the PSC-W, PSC-S, and PSC-R
PM parameters do not increment.
Protection Switching Duration - Span
BLSR is not supported on the OC-3 card;
therefore, the PSD-W, PSD-S, and PSD-R
PM parameters do not increment.
Chapter 18 DLPs A100 to A199
Options
Numeric. Can be set for 15-minute or
one-day intervals for Line, Section, or
Path (Near and Far End). Select the bullet
and click Refresh.
Numeric. Can be set for 15-minute or
one-day intervals for Line, Section, or
Path (Near and Far End). Select the bullet
and click Refresh.
Numeric. Can be set for 15-minute or
one-day intervals for Line, Section, or
Path (Near and Far End). Select the bullet
and click Refresh.
Numeric. Can be set for 15-minute or
one-day intervals for Line or Path (Near
and Far End). Select the bullet and click
Refresh.
Numeric. Can be set for 15-minute or
one-day intervals for Line or Path (Near
and Far End). Select the bullet and click
Refresh.
Numeric. Can be set for 15-minute or
one-day intervals for Line (Near and Far
End). Select the bullet and click Refresh.
Numeric. Can be set for 15-minute or
one-day intervals for Line (Near and Far
End). Select the bullet and click Refresh.
Numeric. Can be set for 15-minute or
one-day intervals for Line (Near and Far
End). Select the bullet and click Refresh.
Numeric. Can be set for 15-minute or
one-day intervals for Line (Near and Far
End). Select the bullet and click Refresh.
Numeric. Can be set for 15-minute or
one-day intervals for Line (Near and Far
End). Select the bullet and click Refresh.
Numeric. Can be set for 15-minute or
one-day intervals for Line (Near and Far
End). Select the bullet and click Refresh.
March 2007