Figure - Cisco ONS 15454 Series Procedure Manual

DLP-A122 Enable/Disable Intermediate Path Performance Monitoring

Figure 18-5

Card View
Provisioning
SONET STS
Click the check box in the Enable IPPM column and make a selection based on the following rules:
Step 3
Unchecked means IPPM is disabled for that STS (default)
•
Checked means IPPM is enabled for that STS
•
Click Apply.
Step 4
Click the Performance tab to view PM parameters. For IPPM parameter definitions, refer to the
Step 5
"Performance Monitoring" chapter of the Cisco ONS 15454 Troubleshooting Guide.
Return to your originating procedure (NTP).
Step 6
Cisco ONS 15454 Procedure Guide, R5.0
18-10
SONET STS Tab for Enabling or Disabling IPPM
tab
tab
Enable IPPM
check box
Chapter 18 DLPs A100 to A199
Apply
button
March 2007