Table 20-6 Electrical Path Threshold Options For The Ds3Xm-12 Card - Cisco ONS 15454 Series Procedure Manual

DLP-A387 Change Line and Threshold Settings for the DS3XM-12 Card
Table 20-5
Parameter
SES
LOSS
Table 20-6
cards.
Table 20-6
Parameter
Port
CV
ES
SES
SAS
AISS
UAS
Cisco ONS 15454 Procedure Guide, R5.0
20-78
Line Thresholds Options for the DS3XM-12 Card (continued)
Description
Severely errored seconds
Loss of signal
describes the values on the Provisioning > Elect Path Thresholds tabs for the DS3XM-12
Electrical Path Threshold Options for the DS3XM-12 Card
Description
(Display only.) Port number
Coding violations
Errored seconds
Severely errored seconds
Severely errored frame/alarm
indication signal
Alarm indication signal
seconds
Unavailable seconds
Options
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Show Thresholds.
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Show Thresholds.
Options
1 to 36
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click Show Thresholds
(DS3, Pbit Near End only; DS3 CPbit, Near and Far
End; DS1, only if there is a VT circuit dropped on the
port).
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click Show Thresholds
(DS3, Pbit Near End only; DS3 CPbit, Near and Far
End; DS1, only if there is a VT circuit dropped on the
port).
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click Show Thresholds
(DS3, Pbit Near End only; DS3 CPbit, Near and Far
End; DS1, only if there is a VT circuit dropped on the
port).
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click Show Thresholds
(DS3, Pbit Near End only; DS3 CPbit, Near and Far
End; DS1, only if there is a VT circuit dropped on the
port).
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click Show Thresholds
(DS3, Pbit Near End only; DS3 CPbit, Near and Far
End; DS1, only if there is a VT circuit dropped on the
port).
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click Show Thresholds
(DS3, Pbit Near End only; DS3 CPbit, Near and Far
End; DS1, only if there is a VT circuit dropped on the
port).
Chapter 20 DLPs A300 to A399
March 2005