Table 20-11 Sonet Threshold Options For The Ds3/Ec1-48 Card - Cisco ONS 15454 Series Procedure Manual

DLP-A388 Change Line and Threshold Settings for the DS3/EC1-48 Cards
Table 20-10
Parameter
SES
SAS
AISS
UAS
Table 20-11
card.
Table 20-11
Parameter
Port
CV
ES
FC
SES
UAS
Cisco ONS 15454 Procedure Guide, R5.0
20-84
Electrical Path Threshold Options for the DS3/EC1-48 Card (continued)
Description
Severely errored seconds
Severely errored frame/alarm indication
signal
Alarm indication signal seconds
Unavailable seconds
describes the values on the Provisioning > SONET Thresholds tabs for the DS3/EC1-48
SONET Threshold Options for the DS3/EC1-48 Card
Description
(Display only.) DS-3 ports partitioned for
STS
Coding violations
Errored seconds
Failure count
Severely errored seconds
Unavailable seconds
Chapter 20
Options
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and click
Show Thresholds (Pbit Near End only;
CPbit, Near and Far End).
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and click
Show Thresholds (Pbit Near End only).
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and click
Show Thresholds (Pbit Near End only).
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and click
Show Thresholds (Pbit Near End only;
CPbit, Near and Far End).
Options
Line 1, STS 1, Line 2, STS 1
Line 3, STS 1, Line 4 STS 1
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Show Thresholds (Near and Far
End, STS termination only).
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Show Thresholds (Near and Far
End, STS termination only).
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Show Thresholds (Near and Far
End, STS termination only).
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Show Thresholds (Near and Far
End, STS termination only).
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Show Thresholds (Near and Far
End, STS termination only).
DLPs A300 to A399
March 2005