Figure 22-6 Select Node/Profile Combination For Delete Dialog Box - Cisco ONS 15454 Series Procedure Manual

Hide thumbs Also See for ONS 15454 Series:

Table of Contents

DLPs A500 to A599

Click the node name(s) in the Node Names list to highlight the profile location.

Click the profile name(s) you want to delete in the Profile Names list.

Click Yes in the Delete Alarm Profile dialog box.

To remove the alarm profile from the window, right-click the column of the profile you deleted and

choose Remove from the shortcut menu.

October 2005

Select Node/Profile Combination For Delete Dialog Box

You cannot delete the Inherited or Default alarm profiles.

A previously created alarm profile cannot be deleted unless it has been stored on the node. If the

profile is visible on the Alarm Profiles tab but is not listed in the Select Node/Profile

Combinations to Delete dialog box, continue with

If you hold down the Shift key, you can select consecutive node names. If you hold down the

Ctrl key, you can select any combination of nodes.

If you delete a profile from a node, it still appears in the network view Provisioning >

Alarm Profile Editor window unless you remove it using the following step.

If a node and profile combination is selected but does not exist, a warning appears: "One or more

of the profile(s) selected do not exist on one or more of the node(s) selected." For example, if

Node A has only Profile 1 stored and the user tries to delete both Profile 1 and Profile 2 from

Node A, this warning appears. However, the operation still removes Profile 1 from Node A.

The Default and Inherited special profiles cannot be deleted and do not appear in the

Select Node/Profile Combination for Delete dialog box.

DLP-A520 Delete Alarm Severity Profiles

Cisco ONS 15454 Procedure Guide, R5.0

Chapters

Table of Contents