Cisco ONS 15454 Series Procedure Manual page 656

DLP-A321 View ML-Series POS Ports PM Parameters
For ML-Series card provisioning, see the Ethernet Card Software Feature and Configuration Guide for
Note
the Cisco ONS 15454 SDH, Cisco ONS 15454, and Cisco ONS 15327.
In node view, double-click the ML-Series Ethernet card where you want to view PM counts. The card
Step 1
view appears.
Click the Performance > POS Ports tabs
Step 2
Figure 20-2
Card View
Performance
Ether Ports
Step 3 Click Refresh. Performance monitoring statistics for each port on the card appear.
Step 4 View the PM parameter names that appear in the Param column. The PM parameter values appear in the
Port # columns. For PM parameter definitions refer to the "Performance Monitoring" chapter in the
Cisco ONS 15454 Troubleshooting Guide.
Note
Step 5 Return to your originating procedure (NTP).
Cisco ONS 15454 Procedure Guide, R5.0
20-12
POS Ports on the ML-Series Card View Performance Window
tab
tab
Refresh
button
To refresh, reset, or clear PM counts, see the
on page 8-2.
(Figure 20-2).
Auto-refresh
menu
"NTP-A253 Change the PM Display" procedure
Chapter 20 DLPs A300 to A399
Baseline Help
button button
March 2005