Dlp- A260 Set Auto-Refresh Interval For Displayed Pm Counts - Cisco ONS 15454 Series Procedure Manual

Chapter 19 DLPs A200 to A299
DLP-A260 Set Auto-Refresh Interval for Displayed PM Counts
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the card where you want to view PM counts. The card view appears.
Step 1
Step 2 Click the Performance tab.
From the Auto-refresh drop-down list, choose one of six options:
Step 3
•
•
•
•
•
•
Step 4 Click Refresh. The PM counts for the newly selected auto-refresh time interval appear.
Depending on the selected auto-refresh interval, the displayed PM counts automatically update when
each refresh interval completes. If the auto-refresh interval is set to None, the PM counts that appear are
not updated unless you click Refresh.
Step 5 Return to your originating procedure (NTP).
DLP-A261 Refresh PM Counts for a Different Port
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the card where you want to view PM counts. The card view appears.
Step 1
Click the Performance tab.
Step 2
Step 3 In the Port drop-down list, choose a port.
September 2005
None: This option disables the auto-refresh feature.
15 Seconds: This option sets the window auto-refresh at 15-second time intervals.
30 Seconds: This option sets the window auto-refresh at 30-second time intervals.
1 Minute: This option sets the window auto-refresh at 1-minute time intervals.
3 Minutes: This option sets the window auto-refresh at 3-minute time intervals.
5 Minutes: This option sets the window auto-refresh at 5-minute time intervals.
DLP-A260 Set Auto-Refresh Interval for Displayed PM Counts
This task changes the window auto-refresh intervals for updating the
displayed PM counts.
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Retrieve or higher
This task changes the window view to display PM counts for another
port on a multiport card.
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Retrieve or higher
Cisco ONS 15454 Procedure Guide, R5.0
19-43