Chapter 20
DLPs A300 to A399
Use a Phillips screwdriver to install five of the six perimeter screws
Step 8
perimeter screw out, and torque to 8 to 10 lbf-inch (9.2 to 11.5 kgf-cm) to secure the cover panel to the
backplane.
Figure 20-27
Reinstall the lower backplane cover using a Phillips screwdriver, inserting five screws and tightening
Step 9
until seated.
Return to your originating procedure (NTP).
Step 10
March 2005
Installing the UBIC-H EIA
DLP-A399 Install a UBIC-H EIA
(Figure
20-27), leaving the lower
Cisco ONS 15454 Procedure Guide, R5.0
20-101