Cisco ONS 15454 Series Procedure Manual page 331

Hide thumbs Also See for ONS 15454 Series:
Table of Contents

Advertisement

Convert Network Configurations
The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms
Note
do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration.
Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's
path protection feature, which may be used in any topological network configuration. Cisco does not
recommend using its path protection feature in any particular topological network configuration.
This chapter explains how to convert from one SONET topology to another in a Cisco ONS 15454
network. For initial network turn up, see
Before You Begin
This section lists the chapter procedures (NTPs). Turn to a procedure for applicable tasks (DLPs).
1.
2.
3.
4.
5.
6.
7.
8.
December 2004
NTP-A309 Convert a 1+1 Point-to-Point to a Linear ADM Automatically, page
needed.
NTP-A154 Convert a 1+1 Point-to-Point to a Linear ADM Manually, page
needed if the in-service topology upgrade wizard is not available or you need to back out of the
wizard.
NTP-A303 Convert an Unprotected Point-to-Point or 1+1 Linear ADM to a Two-Fiber BLSR
Automatically, page
13-6—Complete as needed.
NTP-A155 Convert a 1+1 Point-to-Point or a Linear ADM to a Two-Fiber BLSR Manually, page
13-8—Complete as needed if the in-service topology upgrade wizard is not available or you need to
back out of the wizard.
NTP-A299 Convert a Point-to-Point or Linear ADM to a Path Protection Automatically, page
13-11—Complete as needed.
NTP-A156 Convert a Point-to-Point or Linear ADM to a Path Protection Manually, page
13-12—Complete as needed if the in-service topology upgrade wizard is not available or you need
to back out of the wizard.
NTP-A267 Convert a Path Protection to a Two-Fiber BLSR Automatically, page
as needed.
NTP-A210 Convert a Path Protection to a Two-Fiber BLSR Manually, page
needed if the in-service topology upgrade wizard is not available or you need to back out of the
wizard.
C H A P T E R
Chapter 5, "Turn Up Network."
Cisco ONS 15454 Procedure Guide, R5.0
13
13-2—Complete as
13-5—Complete as
13-13—Complete
13-15—Complete as
13-1

Advertisement

Table of Contents
loading

Table of Contents