Cisco ONS 15454 Series Procedure Manual page 32

Procedures
NTP-A71 Create, Download, and Assign Alarm Severity Profiles
NTP-A168 Enable, Modify, or Disable Alarm Severity Filtering
NTP-A72 Suppress Alarms or Discontinue Alarm Suppression
NTP-A32 Provision External Alarms and Controls on the Alarm Interface Controller
NTP-A258 Provision External Alarms and Controls on the Alarm Interface Controller-International
NTP-A253 Change the PM Display
NTP-A122 Monitor Electrical Performance
NTP-A198 Monitor Ethernet Performance
NTP-A279 Create or Delete Ethernet RMON Thresholds
NTP-A250 Monitor OC-N Performance
NTP-A285 Monitor FC_MR-4 Performance
NTP-A289 Create or Delete FC_MR-4 RMON Thresholds
NTP-A199 Locate and View Circuits
NTP-A200 View Cross-Connect Card Resource Usage
NTP-A151 Modify and Delete Circuits
NTP-A278 Modify and Delete Overhead Circuits
NTP-A78 Create a Monitor Circuit
NTP-A79 Create a J1 Path Trace
NTP-A293 Create a J2 Path Trace
NTP-A298 Reconfigure Circuits
NTP-A301 Merge Circuits
NTP-A81 Change Node Management Information
NTP-A201 Change CTC Network Access
NTP-A202 Customize the CTC Network View
NTP-A203 Modify or Delete Card Protection Settings
NTP-A292 Modify or Delete Communications Channel Terminations and Provisionable Patchcords
NTP-A85 Change Node Timing
NTP-A205 Modify Users and Change Security
NTP-A87 Change SNMP Settings
NTP-A88 Modify Line Settings and PM Parameter Thresholds for Electrical Cards
NTP-A89 Modify Line Settings and PM Parameter Thresholds for OC-N Cards
NTP-A90 Modify Alarm Interface Controller Settings
NTP-A118 Modify Alarm Interface Controller-International Settings
NTP-A91 Upgrade DS-1 and DS-3 Protect Cards from 1:1 Protection to 1:N Protection
NTP-A315 Modify Port Settings and PM Parameter Thresholds for FC_MR-4 Cards
Cisco ONS 15454 Procedure Guide, R5.0
xxxii
8-2
8-3
8-5
8-6
8-7
9-2
9-2
9-4
9-4
9-5
9-6
9-7
9-9
9-10
10-2
10-2
10-3
10-4
10-5
10-6
10-6
11-3
7-7
7-8
7-8
7-9
8-5
8-7
11-2
11-2
11-4
11-5
7-11
10-4
11-4
December 2004