Figure 17-26 Logging Into Ctc - Cisco ONS 15454 Series Procedure Manual

DLP-A60 Log into CTC
Figure 17-26
In the Login dialog box, type a user name and password (both are case sensitive). For initial setup, type
Step 3
the user name CISCO15 and the password otbu+1.
Note
Each time you log into an ONS 15454, you can make selections on the following login options:
Step 4
Node Name—Displays the IP address entered in the web browser and a drop-down list of previously
•
entered ONS 15454 IP addresses. You can select any ONS 15454 on the list for the login, or you can
enter the IP address (or node name) of any new node where you want to log in.
Additional Nodes—Displays a list of current login node groups. To create a login node group or add
•
additional groups, see the
Disable Network Discovery—Check this box to view only the ONS 15454 (and login node group
•
members, if any) entered in the Node Name field. Nodes linked to this node through data
communications channels (DCCs) are not discovered and will not appear in CTC network view.
Using this option can decrease the CTC startup time in networks with many DCC-connected nodes,
and reduce memory consumption.
Disable Circuit Management—Check this box to disable discovery of existing circuits. Using this
•
option can decrease the CTC initialization time in networks with many existing circuits and reduce
memory consumption. This option does not prevent the creation and management of new circuits.
Click Login.
Step 5
Cisco ONS 15454 Procedure Guide, R5.0
17-68
Logging into CTC
The CISCO15 user is provided with every ONS 15454. CISCO15 has superuser privileges, so
you can create other users. You must create another superuser before you can delete the
CISCO15 user. CISCO15 is delivered with the otbu+1 password. To change the password for
CISCO15, click the Provisioning > Security tabs after you log in and change the password. To
set up ONS 15454 users and assign security, go to the
Security" procedure on page
"Security and Timing" chapter in the Cisco ONS 15454 Reference Manual.
"DLP-A61 Create Login Node Groups" task on page
"NTP-A30 Create Users and Assign
4-4. Additional information about security is provided in the
Chapter 17 DLPs A1 to A99
17-69.
March 2005