Table 18-2 Managing Domains; Dlp-A150 Modify A 1:1 Protection Group - Cisco ONS 15454 Series Procedure Manual

DLP-A150 Modify a 1:1 Protection Group
Table 18-2
Domain action
Move a domain
Rename a domain
Add a node to a
domain
Move a node from a
domain to the
network map
Open a domain
Return to network
view
Preview domain
contents
Remove domain
Return to your originating procedure (NTP).
Step 3

DLP-A150 Modify a 1:1 Protection Group

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Protection tabs.
Step 1
In the Protection Groups area, click the 1:1 protection group you want to modify.
Step 2
In the Selected Group area, you can modify the following, as needed:
Step 3
•
Cisco ONS 15454 Procedure Guide, R5.0
18-20
Managing Domains
Steps
Press Ctrl and drag and drop the domain icon to the new location.
Right-click the domain icon and choose Rename Domain from the shortcut
menu. Type the new name in the domain name field.
Drag and drop the node icon to the domain icon.
Open the domain and right-click a node. Choose Move Node Back to Parent
View.
Double-click the domain icon. Alternatively, right-click the domain and choose
Open Domain.
Right-click the domain view area and choose Go to Parent View from the
shortcut menu.
Right-click the domain icon and choose Show Domain Overview. The domain
icon shows a small preview of the nodes in the domain. To turn off the domain
overview, right-click the overview and select Show Domain Overview.
Right-click the domain icon and choose Remove Domain. Any nodes in the
domain are returned to the network map.
This task modifies a 1:1 protection group for electrical (DS-1, DS-3, EC-1,
and DS3XM) cards.
None
DLP-A71 Create a 1:1 Protection Group, page 17-78
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Provisioning or higher
Name-As needed, type the changes to the protection group name. The name can have up to
32 alphanumeric characters.
Chapter 18 DLPs A100 to A199
March 2007