Processor Card Leds - Cisco ONS 15540 ESPx Hardware Installation Manual

Cisco ONS 15540 ESPx Components

Processor Card LEDs

Table 1-2 Processor Card LEDs
LED Status
STATUS Red
Orange
Green
ACTIVE Green
STANDBY Green
SLOT 0 Green
SLOT 1 Green
1
NME
FULL Green
DUPLEX
Off
100MBPS Green
Off
LINK Green
Off
Cisco ONS 15540 ESPx Hardware Installation Guide
1-8
Figure 1-3 Processor Card
CONSOLE PORT
Processor cards manage communication functions for the system. The cards
monitor all modules in the chassis and determine the state of the system. Each
module determines its state from feedback at various system monitoring points.
The processor generates clocking to all the modules and some additional
components in the system.
Table 1-2 lists the LEDs on the processor card faceplate, their default conditions,
and what the conditions indicate.
Description
A board resets or initially powers on.
System initialization.
Full initialization and operational.
This board is the primary processor and is running IOS software.
This board is the secondary processor.
Flash PC Card is present.
Flash PC Card is present.
Full duplex is running.
Half duplex is running.
Operating at 100 Mbps.
Operating at 10 Mbps.
Link is up.
Link is down.
Chapter 1 Product Overview
78-16436-01