Show Ip Dhcp Snooping Binding - Dell PowerConnect 5424 Command Line Interface Manual

Default Configuration
This command has no default configuration.
Command Mode
EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example displays the DHCP snooping configuration.
Console # show ip dhcp snooping
DHCP snooping is enabled
DHCP snooping is configured on following VLANs: 2, 7-18
DHCP snooping database: enabled
Verification of hwaddr field is enabled
Interface
g1
g2

show ip dhcp snooping binding

The show ip dhcp snooping binding User EXEC mode command displays the DHCP snooping binding
database and configuration information for all interfaces on a switch.
Syntax
• show ip dhcp snooping binding [mac-address mac-address] [ip-address ip-address] [vlan vlan]
[ethernet interface | port-channel port-channel-number]
• mac-address — Specify a MAC address.
• ip-address — Specify an IP address.
• vlan-id — Specify a VLAN number.
• interface — Specify Ethernet port.
• port-channel-number — Specify Port-channel number.
Default Configuration
This command has no default configuration.
Trusted
Yes
Yes
185
DHCP Snooping